Brushless ESC 160A

This controller, specially developed for RC cars of the 1/5 and 1/6 scales, has an aluminum heat sink and Mini fan equipped. This means that the temperature remains constant, even with high functional performance. The controller is powered by 3 to 8S Li-Po batteries with serial connection.The controller is very progressive at start and linear when accelerating. It is easy to change the various functions of the controller using the programming card.

Technical Specs:

• DC current: 160 A / peak current: 1050A
• Supply: Li-Po 3 to 8S in series or 9-24 NIMH
• BEC 6-7.4V / 6A
• Dimensions: 70x56x46.5mm
• Weight: 240 grams
• Expandable cables with EC8 connections
• Functions: forward, backward, brake, engine brake
• Brake deceleration -> setting the reverse function
• Possibility to adjust the braking strength
• Switch-off voltage adjustable
• Motor brake percentage adjustable
• Motor direction of rotation
• Acceleration mode

Functions:

• Compatible with brushless sensorless motor and sensored motor in sensorless mode.
• 3 function modes (forward, brake and forward / backward with brake)
• Proportional braking function with 9 adjustment rubrics and 9 adjustment rubrics for the engine brake.
• 5 acceleration modes from SOFT to VERY HARD
• Various protective functions: switch-off at low voltage for Li-Po and NIMH batteries as well as protection against overheating.
• Easy programming via setting button or programming card (to be purchased separately)

Gear ratio:

• On-Road: 21/44/15
• Off-Road: 16/48/14
• Monster: 15/48/14

Before use, the following parts are needed;

• FG68510   FG 1/6 2WD
• FG68511   FG 1/5 2WD
• FG68512   FG 1/5 en 1/6 2WD en 4WD
• FG7902     1300KV E-Motor
• FG66514   Reducer Ø8 to Ø10 mm when using FG gears