Share
FG6464/05 Air filter foam Pre-Oiled, 2 pcs.
In stock
Order now and it will be sent next Tuesday
Air filter foam FG Pre-oiled
Dimensions:
- Inside diameter: Ø20 mm
- Outer diameter: Ø60 mm
- Height: 70 mm
Maintenance and user instructions:
Cleaning the filter;
- Heavily soiled filters: brush off the excessive dirt with a soft brush,
- Take a container that is at least two times the size of the filter and fill it with warm water,
- Add 3-5 tablespoons (depending on the pollution), cleaner TPS0490/06,
- Put the filter upside down in the container, with the rubber part above the water line,
- Let the filter soak for 20-30 minutes and then rinse it out from the inside out with warm water,
- Repeat this procedure until the water is completely clear, and let the filter dry thoroughly.
Oiling for On-Road use;
- Spray the top and side of the filter in with special foam air filter oil PUT9894,
- From left to right and top to bottom until the whole filter has a uniform color,
- Gently massage the oil in the filter using a plastic bag, then let in the filter dry for at least an hour in open air,
- The amount of oil that should be applied depends entirely on the circumstances, more dirt also means more oil,
- Ready for use. Oiling for Off-Road use;
- Take a container where the filter fits in, and fill it with half the contents of filter oil TPS0490/05
- Now press the foam part in the oil, and let it soak for a few seconds,
- Take the filter out and gently press out all excessive oil out immediately,
- Put the remainder oil back into the bottle and store it in a cool dark place,
- Gently massage the oil in the filter using a plastic bag, then let in the filter dry for at least an hour in open air,
- Take a paper towel, press it in, and wrap it around the filter to get rid of all excessive oil,
- Ready for use
** NEVER USE AGGRESSIVE AGENTS LIKE BRAKE CLEANER OR PRESSED AIR **
Write Your Own Review
Validate your login
Sign In
Create an Account